7. Attach one end of the air tubing to the air tubing connector
located on the front of the compressor.
8. Attach the other end of the air tubing to the base of the
nebulizer.
In the case of high humidity, condensation may form
inside the internal tubing. Run the unit for two minutes
before connecting the nebulizer to the tubing.
9. Attach the mouthpiece to the top section of the nebulizer.
NOTE: Before starting a cold unit, let the unit reach room
temperature in a heated area.
10. With the power switch off, plug the power cord into an
appropriate electrical outlet.
Part No 1130203
SECTION 2—OPERATING INSTRUCTIONS
FIGURE 2.1 Adding Medication
WARNING
Eyedropper
19
Nebulizer Cup
Stratos™Compact