INSTRUCTIONS FOR USE
Before connecting the product, check that the mains voltage is the same as that indicated in
The product label.
The mains cable must not be entangled or wrapped around the product during
Use of this.
Do not pull on the connecting cable to unplug it.
Do not use plug or unplug the appliance if your hands or feet are wet.
Proceed as directed.
OPERATION INSTRUCTION
1. Fill water
Please kindly fill water before using.
Remark:
- please make sure that no residual water in the boiler before adding water. Pour out the rest water
after finish using and clean the boiler. There will be calcification inside which may clog the steam
after long time.
- Method of cleaning boiler: first add small amount of water in the boiler, fully shaking hands rock the
machine, and than pour out the water completely. Suggest you can repeat above action if the water
contains a lot of impurity.
- In order to get idea steam, please be sure to fill 1 liter water. You can check the scale in the cup.
- Please screw the safety valve when water filled.
Do not inject any liquid except clean water
2. Power on
- Please ensure that the boiler with water and the safety valve in a tight status before power on.
- Put the plug into socket and open the power switch. If the power is on, the red light will on
Do not use wet hand to touch the power
Do not use any power cord & socket in broken status.
21