Key Properties And Features; Bluetooth Functionality; Programmable Relay - Victron Energie Phoenix Smart 12/30 (1+1) Manual De Instrucciones

4. Key properties and features

4.1. Bluetooth functionality

Set-up, monitoring and updating of the charger. Option for parallel
redundant charging.
New functions can be added once they become available using Apple and
Android smartphones, tablets and other devices.
When using Bluetooth functionality, a PIN can be set to prevent
unauthorised access to the device. This PIN can be reset to its default
value (000000) by holding the MODE button down for 10 seconds.
For more information, refer to the
4.2. VE.Direct port
For a wired connection with a Color Control, Venus GX, PC or other
devices.

4.3. Programmable relay

Can be programmed (e.g. with a smartphone) for activation by an alarm or
other events. Note that the relay only works when there is AC available on
the AC input terminals, and therefor the relay cannot be used as, for example, a
generator start/stop signal.
4.4. 'Green' battery charger with very high efficiency
With an efficiency of up to 94%, these battery chargers generate up to four times
less heat than the industry standard. And once the battery is fully charged,
power consumption drops to less than 1 Watt, which is five to ten times better
than the industry standard.
4.5. Sustainable, safe and silent
- Low thermal load on the electronic components.
- Overheating protection: The output current drops if the temperature rises to
60°C.
- The charger is cooled by means of natural convection. This eliminates the
need for a noisy cooling fan.
VictronConnect
5
manual.