AL-KO UP4 Manual De Instrucciones página 27

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
Operating and control elements of the remote control
Fig. 2
Designation
A
Retract button
in individual mode
B
Red control LED
Retract function
C
Green control LED
"Manoeuvring system mode"
D
Function selection button
E
Green control LED
"Support system mode"
F
Front right support leg button
G
Main switch
(slider switch)
H
Rear right support leg button
1659595_a
1659595_a BA UP4 El_Caravanstütze ESS1 DIN A5 sw.pdf 27
Function
Serves to select the raise function for individual support legs.
1.
Press button (2A).
Red LED (2B) has a steady light.
The support legs can now be raised individually by pressing the cor-
responding buttons.
ADVICE
The buttons for the individual support legs have no function as
long as the raise button is not activated.
If no other button is pressed within 30 seconds, red LED (2B)
goes out and the function is deactivated again.
Red
control LED (2B) lights up as long as the raise function is selected.
Green control LED (2C) lights up as long as "Manoeuvring system mode"
is selected. The AL-KO RANGER manoeuvring system is operated in
this mode.
CAUTION!
Read the operating manual of your caravan manoeuvring sys-
tem for further details!
ADVICE
Operation of the AL-KO support system is not possible in this
operating mode!
1.
Press function selection button (2D) to switch between "Support sys-
tem mode" and "Manoeuvring system mode".
An acoustic signal sounds.
Depending on the selected operating mode, green control LED
(2C) or (2E) lights up.
Green control LED (2E) lights up as long as "Support system mode" is
selected. The AL-KO UP4 support system is operated in this mode.
ADVICE
Operation of the caravan manoeuvring system is not possible in
this operating mode!
1.
First select the raise or lower function (2A or 2S).
2.
Press button (2F).
Depending on the selected function, front right support leg (3C)
is raised or lowered.
0 = "OFF"
I = "ON"
1.
First select the raise or lower function (2A or 2S).
2.
Press button (2H).
Depending on the selected function, rear right support leg (3D)
is raised or lowered.
en
27
08.11.2017 11:19:34

Publicidad

Tabla de contenido
loading

Productos relacionados para AL-KO UP4

Tabla de contenido