Numark Fusion 111 Manual De Inicio Rápido página 2

1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTIONS BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders are at "zero"
6. Connect all input sources as indicated in the diagram.
7. Connect the outputs to your power amplifier, tape deck, or audio devices.
8. Plug your mixer and other devices into AC power.
9. Switch everything on in the following order.
• audio input sources (i.e. CD players or Turntables)
• mixer
• put on headphones
• last, turn on any amplifiers
10. When turning off, always reverse this operation by,
• turning off amplifiers
• remove headphones
• turn off your mixer
• last, turn of any input devices
11. Go to http://www.ion-audio.com for product registration.
QUICK SETUP GUIDE
2