Mount The Camera - D-Link DCS-7010L Guía De Instalación Rápida

Mount the Camera

Please refer to the steps below to assist you with mounting the camera.
We suggest that you configure the camera before mounting.
Step 1
Position the mounting bracket
in the desired location.
Step 2
Mark the surface behind the
mounting bracket with a pencil.
Step 3
Use a 6mm drill bit to make required holes approximately 25mm deep.
Step 4
Insert wall anchors and affix the bracket using the screws provided.
6
Step 5
Ensure the cable is seated in the cable channel.
Step 6
Suspend the camera from the two protruding
7
5
studs near the top of the mounting bracket.
Step 7
Insert and tighten the remaining screw into the hole on the camera base.
6