Vertilux VTi Celtic Manual De Programación página 8

Pairing the motor with the remote control
1.
Press and hold the
head of the motor for approximately
LED indicator on the motor starts flashing RED.
2. Select the desired channel and press the
button for approximately
BLUE
will flash 3 times. The motor is now paired
with the remote control.
The drapery will move in one direction until it reaches either end side of the track. The
indicator will flash
BLUE
limit. With the remote control, move the drapery to the opposite direction, the motor will self
adjust the second limit when it reaches the other end side of the track.
Checking the traversing direction
This function is convenient when the need arises to change the traversing direction. For example,
up button
when pressing the
down button, the drapery opens.
1. Press and hold the
LED
until the indicator on the motor starts
flashing RED.
2. stop button, and press it again for
Release the
about 2 s. The LED indicator will flash
3 times. The drapery has now changed its
traversing direction.
programming button
on the
1 s until the
up
2 s. The LED indicator
3 times to indicate that the motor has automatically self adjusted the first
on the remote control, the drapery closes, or when pressing the
stop button for about 5 s
BLUE
© 2019. Vertilux, Ltd. All Rights Reserved. Last revised: February 2019.
PROGRAMMING
BUTTON
UP
BUTTON
LED
STOP
BUTTON
STOP
BUTTON
vertilux.com
7