Sunbelt SPK70000 Manual Del Operador página 2

THANK YOU for purchasing this product.
READ THIS MANUAL carefully to learn how to operate
and service your machine correctly. Failure to do so
could result in personal injury or equipment damage.
This manual and safety signs on your machine may
also be available in other languages. (See your dealer
to order.)
THIS MANUAL SHOULD BE CONSIDERED a
permanent part of your machine and should remain
with the machine when you sell it.
MEASUREMENTS in this manual are given in both
metric and customary U.S. unit equivalents. Use only
correct replacement parts and fasteners. Metric and
inch fasteners may require a specific metric or inch
wrench.
RIGHT HAND AND LEFT HAND sides are determined
by facing the motor end of the machine.
2
Introduction
The SERIAL NUMBER is located in the Specification
or Identification Numbers section. Accurately record
all the numbers to help in tracing the machine should
it be stolen. Your dealer also needs these numbers
when you order parts. File the identification numbers
in a secure place off the machine.
WARRANTY is provided from your dealer for
customers who operate and maintain their equipment
as described in this manual. The warranty is explained
on the warranty certificate shown in this manual.
This warranty provides you the assurance that your
dealer will back products where defects appear
within the warranty period. Should the equipment
be abused, or modified to change its performance
beyond the original factory specifications, the warranty
will become void.
Operator's Manual