Nice MOU Instrucciones Para El Uso página 23

7.2.6) Duplicate code onto TX [
This command, available only on the BUPC unit, allows you to copy a code present in the main window
to the transmitter connected to the BUPC terminal by means of the specific cable and adapter.
Before activating the command select the code to be copied by moving the highlighted cell with the key-
pad direction keys or by clicking with the mouse.
In "Bio" transmitters this operation is possible only once for each transmitter.
The BUPC unit must be set up in the version compatible with the codes to be copied; it must also be
switched on, correctly connected to the serial port, and with the FUNCTION MENU active.
7.2.7) Duplicate code onto Card [
This command, available only on the MOU unit in "Mom" mode, serves to copy a code present in the main
window to a "grey" rewritable Card: CARDP.
Before activating the command select the code to be copied by moving the highlighted cell with the key-
pad direction keys or by clicking with the mouse.
The MOU unit must be set up in the "Mom" version; it must also be switched on, correctly connected to
the serial port, and with the FUNCTION MENU active.
7.2.8) Associate [
This command serves to link the codes present in the main window with the codes present in a file on
disk, joining the references of the "Name" and "Notes" cells.
7.2.9) Title [ ] [
B F
This command enables you to change the title assigned to the codes present in the main window.
The title appears above the codes window and forms part of data that are saved to disk or printed.
7.2.10) Add code with TX [
This command, which is available only on BUPC, serves to add a code to the codes already present in
the main window by means of direct optical reading of the new code.
The BUPC unit must be set up in the version compatible with the codes to be added; it must also be
switched on, correctly connected to the serial port, and with the FUNCTION MENU active.
7.2.11) Add code with Card [
This command, which is available only on MOU, serves to add a code to the codes already present in the
main window by means of direct proximity reading of the Card code.
The MOU unit must be set up in the "Mom" version; it must also be switched on, correctly connected to
the serial port, and with the FUNCTION MENU active.
7.2.12) Add code [
This command serves to add a code to the codes already present in the main window by typing it direct-
ly from the PC keyboard. In addition to the code, you can also add text in the "Name" and "Notes" fields;
in "Mom" and "Mot" version codes you can also specify on which channels the code will be active and, if
required, a value of the operations counter; in the "Mot" version only, you can specify the ID of the key-
pad in which the combination will be valid.
] [
B
]
C
] [ ] [ ] [ ]
B F C T
] [ ] [ ]
C T
] [ ]
B F
]
C
] [ ] [ ] [ ]
B F C T
]
F
GB
23