Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Parts identification
a
c
e
A Protective cap
B Outer foil section
1 Foil frame
2 System outer foil
3 System outer foil release
buttons
C Inner blades
D Main body
4 Foil frame release buttons
5 OFF/ON switch
6 Switch lock button
4
b
d
f
g
7 LCD panel
a. Used time
b. Battery capacity
c. Charge status
d. Sonic vibration
e. Foil/blade check
f. Clean
g. Battery capacity
8 Appliance socket
9 Trimmer
Trimmer handle
E Adaptor (RE7‑51)
Power cord
Appliance plug
F Self‑cleaning recharger
(Referred to as the
"Recharger".)
Cleaning tray
Detergent cartridge
Socket
Operating environment for the self-cleaning
recharger
Operating temperature:
Operating humidity:
•
If you use the self‑cleaning recharger in temperatures outside the
above range, the following problems may occur.
-
The time it takes to charge the shaver increases.
-
The recharger stops functioning.
-
The lifespan of the rechargeable battery shortens. (Only when
you use the recharger in lower temperatures.) In this case, the
indicators on the LCD panel will blink twice every second.
•
If the indicators on the LCD panel do not glow, wait for a short
while until it glows.
•
Depending on the environment, the shaver may not dry even if
you select a course that includes the "Dry" function. In this case,
wipe off any drops of water with a dry cloth.
Water tank cap
Water tank
Water maximum line
STATUS lamp
CLEAN lamp
DRY lamp
SELECT button
Soft case
15‑35 °C (59‑95 °F)
Less than 95%
Publicidad
Tabla de contenido
