The following table shows the meaning of the different leds of the display of the stove. The lighting of the leds indicates the activation of the
corresponding device according to the following list:
LED
12.3.
STOVE STATE
When the stove is switched on, by pressing button P4 or P5 of the display, it is possible to gain access to the following options that give us
some technical information of the stove.
T. Smoke [°C]
T. Ambient [°C]
Air flow
Fan [rpm]
Endless [°C]
Service [h]
Working hours [h]
Ignitions [nr]
Code Art.
12.4.
USER MENU 1
In order to access the user menu 1, it is necessary to press once the button P3 of the display (short press).
The following table briefly describes the user menu 1 structure of the stove where are detailed all the different options.
In order to move inside the submenus, it is necessary to press the buttons P4 and P5 and then validate with button P3 in order to enter into
each submenu. To modify the values you have to use button P4 and P5 to increase or decrease and validate with button P3. To exit from the
submenu press button P1 to the submenu that you want or to go out to the start screen.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
BUTTON
P1
Exit menu or submenu
ON and OFF (press for 3 seconds)
P2
Alarm reset (press for 3 seconds)
Chrono activation
Enter the menu user 1/submenu
P3
Enter the menu user 2 (press for 3 seconds)
Data load
P4
Enter the menu view, increase
P5
Enter the menu view, decrease
Pellet mode / Wood mode
/
Combi 1 or combi 2 mode
/
Ambient thermostat reached
11:30
Current time
Time program enabled
Combustion power
Heating power
DISPLAY
103
25
750
1250
1.2
1200
2985
106
494
FUNCTION
FUNCTION
DESCRIPCIÓN
Smoke temperature
Ambient temperature of the room
Air flow speed
Smoke fan speed
Activation time of endless screw
Working time before the cleaning for the technician.
Working hours of the stove in Normal State, Modulation and Security.
Number of ignitions made.
Code Article (internal code useless to the user)
35
CAROL-MIXTA