Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.10 "INITIAL CLEANING" MESSAGE
This function enables or disables a message that
reminds the user with each start-up to clean the
•
Feed the stove
•
Press the Menu button (
•
press the button corresponding to the icon of
the settings (
•
the following item will appear: "FACTORY
MENU"
•
scroll through the menu with the up and down
arrow keys (
-
UP MENU"
•
"ok" icon (
)
•
•
scroll through the menu with the up and
down arrow keys (
"START CLEANING"
•
press the button corresponding to the icon of
the settings (
•
select with the up and down arrow keys (
)
•
"ok" icon (
).
)
)
) and locate the item: "SET-
-
) and locate the item:
)
6 MAINTENANCE
6.1 MAINTENANCE
The stove may only be maintained by an authorised
technical service centre.
Prior to effecting any maintenance operation,
adopt the following precautions:
-
Make sure that the stove is completely cold.
-
Make sure that the ashes have gone out
completely.
-
Use the personal protective equipment
-
Make sure the mains power is off at the master
power switch.
-
Ensure that the power supply cannot be
restored accidentally. Remove the power plug
from the socket.
-
Always use proper tools.
-
Once maintenance or repair activities are
completed, reinstall all the protections and
-
reactivate all the safety devices prior to
restarting the system.
6.1.1
This must be done at least once a year, or every 4
tons of pellets.
If it is not kept clean, the stove may experience
problems including:
-
poor combustion
-
blocked brazier, accumulated ash and pellets
-
ash and excessive encrustations on the heat
Publicidad
Tabla de contenido
