Maintenance; Replacing Filter; Replacing Lights - Aria QR251B Manual Del Usario

Maintenance

REPLACING FILTER

When the filter needs replacing, exchange with similar. Also
replace a filter that is damaged with punctures, bends, or a
broken frame .
- Turn off the range hood and disconnect the power .
- Replace with an equivalent filter, then reconnect the
power .
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 40W E26 base
light bulb .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb counter-clockwise and pull it out to remove
it .
- Push in the new bulb and turn it clockwise . Do not
release the bulb until you are sure the bulb has been
securely installed . Then reconnect the power .
- If new bulbs do not operate, ensure that they are
inserted correctly .
QR251B / QR251S / QR251W
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
Failure to replace worn out or damaged filter
will increase the risk of fire.
WARNING:
Light bulbs can become hot when turned on .
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
14