Installation instructions
Electrical connection
For Double Ovens
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Make sure to ground the oven.
Failure to follow these instructions can result in death, fire, or electrical shock.
This oven is manufactured with a neutral (white) power supply wire and a cabinet-
connected ground (green or bare) wire twisted together.
A
A.
UL listed or CSA approved
conduit connector
12 English
Install_NW9000K-DG68-00862A-02_EN+MES+CFR.indb 12
1.
Disconnect power.
2.
Feed the flexible conduit from the oven
through the opening in the cabinet.
Remove junction box cover if it is
3.
present.
4.
Install a UL listed or CSA approved
conduit connector to the junction box.
5.
Route the flexible conduit from the
oven to the junction box through a
UL listed or CSA approved conduit
connector.
6.
Tighten screws on conduit connector.
7.
See "Electrical Connection Options
Chart" to complete installation for your
type of electrical connection.
Electrical Connection Options Chart
If your home has:
4-wire
4-Wire Cable from Home Power Supply
½"
(1.3 cm)
3-wire
3-Wire Cable from Home Power Supply
½"
(1.3 cm)
For Single Ovens
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death, fire, or electrical shock.
Go to section:
9/20/2016 8:50:12 PM