SMA LIGHT 360 Manual De Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EPILATION TREATMENT
The D Light 360 epilation treatment is suitable for all body areas that have hair except the scalp,
male beard, eyebrows, genital and perianal areas.
Any birthmarks or tattoos on the area to be treated must be covered before starting the treatment,
to protect them, you can use an opaque white makeup pencil or a specific product like the D light
Patch Pro. Before starting the treatment, it is advisable to wear certified laser safety glasses or
pulsed light safety eyewear, as an alternative, you can close your eyes when the flash is emitted.
Define the area to be treated (can also help by drawing a grid with a white makeup pencil) and
select the appropriate energy level of the skin type when you are ready.
It is always advisable to start at the lowest energy level and depending on your tolerance, if
you experience no discomfort, you can increase the energy level, treatment is more effective
at highest energy level, but the flash takes longer to load. You can choose between two modes
of operation: single flash or scroll. Using the single flash mode, a flash is emitted everytime the
Flash button (2) is pressed. The scroll mode is activated by holding the Flash button (2) down for
3 seconds, then you can release it and the device will emit flash repeatedly whenever the Flash
window will come into contact with the skin. To turn off scroll mode, just press the Flash button (2)
once and the appliance resumes to function on single flash mode.
When the Flash window is correctly in contact with the skin and the machine is ready for the
Flash, the display starts flashing. It is recommended to radiate 1, maximum 2 times on each
treated area then proceed and move to the next area.
EPILATION TREATMENT CYCLE
For the first 3 months, it is advisable to proceed with 1 treatment per week or every 2 weeks if
you are also doing photorejuvenation or acne treatments on the same area, it is important to
spend at least one week between other treatments by alternating Epilation to the others. The skin
should be hairless after finishing the first 3 month cycle, therefore there will only be maintenance
sessions needed when the hairs begin to reappear (usually a session every 2 or 3 months,
depends on the of individual growth rhythm).
11
PHOTO REJUVENATION TREATMENT
The typical areas of photorejuvenation treatment with D Light 360 are the face, the neckline and
back of the hands. With photorejuvenation treatment (SR) it is possible to attenuate the first signs
of aging by stimulating the production of new collagen, which renews, firms and replenishes
the skin, it is also be possible to lighten discolorations, overall skin texture and brighten the
complexion in case of a grayish or washed tone.
Any birthmarks or tattoos on the area to be treated must be covered before starting the treatment,
to protect them, you can use an opaque white makeup pencil or a specific product like the D light
Patch Pro. Before starting the treatment, it is advisable to wear certified laser safety glasses or
pulsed light safety eyewear, as an alternative,you can close your eyes when the flash is emitted.
Define the area to be treated (can also help by drawing a grid with a white makeup pencil) and
select the appropriate energy level of the skin type when you are ready.
You can choose between two modes of operation: single flash or scroll. Using the single flash
mode, a flash is emitted everytime the Flash button (2) is pressed. The scroll mode is activated
by holding the Flash button (2) down for 3 seconds, then you can release it and the device will
emit flash repeatedly whenever the Flash window will come into contact with the skin. To turn off
scroll mode, just press the Flash button (2) once and the appliance resumes to function on single
flash mode.
When the Flash window is correctly in contact with the skin and the machine is ready for the
Flash, the display starts flashing. It is recommended to radiate once, maximum 2 times on each
treated area then proceed move to the next area.
PHOTOREJUVENATION TREATMENT CYCLE
It is advisable to have 1 treatment per week until the results are achieved.
If you are taking epilation or acne treatments on the same area, it is important to spend at least
one week between photo rejuvenation treatment and other treatments. Once you have reached
the desired results you can suspend the weekly treatments and schedule maintenance treatments
according to individual needs.
12

Publicidad

Tabla de contenido
loading

Productos relacionados para SMA LIGHT 360

Tabla de contenido