Supplementary manual TECNO R-evolution
ByTecnoplus
s.r.l.
CENTRAL VACUUM SYSTEMS
Reassemble the dust container in its housing under the vacuum cleaner and close it again.
Switch the vacuum cleaner on by pressing the ON/OFF switch. After restarting the central vacuum unit,
press RESET to cancel the alarm relating to the dust container (bag).
Auxiliary connection signal
4 -
Example of connection of the auxiliary contact, normally open, which closes in case of alarms on the
display.
4
Slide the dust-collecting bag from the ver-
2
tical end of the inlet opening
Introduce a new dust bag
3
Ext. supply
220Vac / 12Vdc
Led indicator
or 12V light
12/05/16 Rev:1.0.0