Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up your French Door Refrigerator
2. Disconnect two connectors (
side of the top cap, the one connector
(
) on right side door and the other
7
connector (
) on left side door. Remove
4
the tube (
) with pressing the dark gray
5
color part (
) of the water line coupler.
6
If a red clip is on the coupler, it must
be removed before removing the tube.
CAUTION
3. Remove the 3 hex head bolts (
and right door hinges with a socket wrench (10mm).
Remove the ground screw (
and right door hinges with a philips screwdriver(+).
Remove the upper left and right door hinges (
4. Lift the door straight up to remove.
5. Remove the screw (
door hinges with a philips screwdriver(+).
Remove the 2 hex head bolts (
and right door hinges with an allen wrench(3/16").
Remove the lower left and right door hinges (
10_ Setting Up
DA68-01827B-17.indb 10
DA68-01827B-17.indb 10
) at each
3
) attached to the upper left
7
) attached to the upper left
8
9
) attached to the lower left and right
10
) attached to the lower left
11
12
3
4
5
6
7
9
).
12
10
).
7
Socket wrench
8
11
Allen wrench
3
2014. 5. 8.
2014. 5. 8.
4:39
4:39
Publicidad
Tabla de contenido
Solución de problemas
