Unpack The Machine; Install The Pivoting Head; Remove The Pivoting Head - GreenWorks Pro PH60L210 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
If the battery pack cracks or breaks, with or without leaks,
do not recharge it and do not use. Discard it and replace
with a new battery pack. DO NOT TRY TO REPAIR IT! To
prevent injury and risk of fire, explosion, or electric shock,
and to avoid damage to the environment:
Cover the terminals of the battery with heavy-duty
adhesive tape.
DO NOT try to remove or destroy any of the battery
pack components.
DO NOT try to open the battery pack.
If a leak develops, the released electrolytes are
corrosive and toxic. DO NOT get the solution in the
eyes or on skin, and do not swallow it.
DO NOT put these batteries in your regular household
trash.
DO NOT incinerate.
DO NOT put them where they will become part of any
waste landfill or municipal solid waste stream.
Take them to a certified recycling or disposal center.
8

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
If parts of the machine are damaged, do not use the
machine.
If you do not have all the parts, do not operate the
machine.
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
English
8.1

INSTALL THE PIVOTING HEAD

1. Align the handle shaft with the trimmer head.
2. Push the trimmer head onto the handle shaft.
3. Fasten the coupler.
Periodically check the connections to ensure that they are
tightened securely.
8.2

REMOVE THE PIVOTING HEAD

1. Rest the machine on the ground.
2. Loosen the coupler.
3. Take off the pivoting head.
7
WARNING
EN

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ph60l00Ptc401

Tabla de contenido