Samsung flexwash WV60M9900A Serie Manual De Usuario página 47

10 Steam
11 Super Speed
12 Delay End
WV60M9900A-03768A-00_EN.indd 47
With the Steam option selected, the washer senses the weight of
the load and controls the steam effect according to the load size.
This improves washing performance. Cycles available with the
Steam option are: NORMAL, HEAVY DUTY, BEDDING, WHITES, and
SANITIZE.
1. Select a cycle. For applicable cycles, see above.
2. Press Steam.
3. Add detergent and fabric softener as instructed.
4. Press and hold START/PAUSE to start the cycle.
NOTE
Steam may not be visible or present during the cycle, which is
normal.
Press this button if you need to shorten the washing time,
applicable for NORMAL, HEAVY DUTY, or BEDDING. The shortened
time may differ depending on the selected cycle/load/options.
You can set the washer to finish your wash automatically at a
later time by choosing a delay of between 1 to 24 hours (in 1 hour
increments). The hour displayed indicates the time the wash will
finish.
1. Select a cycle. Then, change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press and hold START/PAUSE. The lamp indicator next to the
Delay End button turns on with the clock running.
4. To cancel Delay End, restart the washer by pressing POWER.
Real-life case
You want to finish a two-hour cycle 3 hours from now. To do
this, you add the Delay End option to the current cycle with a
3-hour setting, and then press and hold START/PAUSE at 2:00 p.m.
The washer starts operating at 3:00 p.m. and ends at 5:00 p.m.
Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
3:00 pm 5:00 pm
Start End
English 47
2017-01-13 4:35:45