Maintenance
Lint filter
We recommend cleaning the lint filter every 10 washes.
60
English
WV60M9900A-03768A-00_EN.indd 60
2. Use a soft brush (for example, a
toothbrush) to clean inside the
compartment and remove impurities.
3. Run the RINSE+SPIN cycle to rinse the
compartment. After supplying water
and draining 5 times, the 18-minute
cycle completes with the final spin
process.
1. Remove the lint filter from the filter
case on the tub of the upper washer.
NOTE
It is recommended to use a coin or a thin
metal object to remove and open the lint
filter.
2. Open the filter, and clean it with
running water and a brush.
3. When cleaning is complete, close the
filter and reinsert it in its original
position. You will hear a clicking sound
when the filter is inserted correctly.
2017-01-13
4:35:47