ElectroKill 160 Instrucciones De Manejo Y Seguridad página 6

EN
Operating and Safety Instructions for Electric Fly Killers
1. General instructions
The present operating and safety instructions are for the user. Please read the instructions carefully and tho-
roughly and take heed of the regulations before putting the device into operation!
2. Safety instructions
2.1. Use
In the event of improper use of and tampering with the device, the warranty and liability of the manufacturer
will be rendered null and void. The voltage given on the name plate must correspond to the voltage of the
power source.
2.2. Check all components before each implementation.
Damaged parts are only to be repaired by a specialist or by the manufacturer. Repairs done improperly can
result in accidents for the operator. Use only original parts for any eventual repairs.
2.3. Safety
Before cleaning, rearranging or servicing the device always first pull the plug from the power source!
High Voltage
2.4. Keep unauthorized persons away.
Make sure that unauthorized persons, children in particular, do not have access to the fly killer.
2.5. Fire hazard!
Do not operate the electric fly killer in barns or similar places and do not set the device up in the vicinity of
combustible materials and in places where the presence of combustible vapors, explosive dust or ignitable
fluids is likely.
2.6. Guard the connection lines
Do not use the connection line to pull the plug from the power source or to carry the device. Take precautions
that the connection lines are not exposed to heat, oil or sharp edges. Damaged connection lines can cause
fires, short-circuiting and electric shocks. In the event that the connection line of this device gets damaged, it
must be replaced by a special connection line available from the manufacturer or from customer service.
2.7. Take the ambient influences into account.
Guard your device against all liquids and moisture. Never submerge in water or clean with a water jet.
Otherwise there will be a danger of fire or electric shock.
2.8. Regular servicing.
Always store your device securely, out of reach of children, and dry. Heed all possible maintenance re-
gulations. Check the device at regular intervals. Use only original spare parts and accessories.
2.9. National and international regulations
National and international safety, health and labor regulations are to be heeded.
3. Operating instructions
3.1. Function
By means of ultraviolet light, flying insects are lured into the effective range of the device. Attached in front of
the light tube is a screen charged with high voltage. Upon contact with this high-tension screen the insects
are quickly and hygienically killed. The fallen insects are collected in a drip pan which only has to be removed
from the housing for emptying.
3.2. Unpacking
Open the packing carefully and remove all the parts. Avoid scratching the device on sharp or pointed objects.
Make sure that none of the parts, in particular the chain and the drip pan, is left in the packing.
Keep the operating instructions in a safe place!
3.3. Assembly/erection
The device can be
- put in place (Type 160, 300) or
- suspended on the chain which is included.
Relevant for both variants: Make sure the device is not placed too close to sources of ignition, i.e. easily
combustible objects.
The device is not made for outdoor use!