Factory Calibration Reset - Xylem YSI 910 COD Manual De Instrucciones

FaCtOrY CaliBratiOn reset

Resetting the user calibration to the original factory calibration will reset all me-
Store Date
Cal
RESULT
thods and ranges.
Time Cal
A user calibrated method is indicated by an arrow while the test result is
displayed.
To reset the calibration press both the [MODE] and [ZERO/TEST] key
Zero
Mode
and hold .
Test
Turn the unit on using the [ON/OFF] key.
On
Release the [MODE] and [ZERO/TEST] keys after approx. 1 second.
Off
The following messages will appear in turn on the display:
SEL
The factory setting is active.
(SEL stands for Select)
CAL
or:
Calibration has been set by the user.
SEL
(If the user calibration is to be retained, turn the unit off using the
cAL
[ON/OFF] key).
Calibration is reset to the factory setting by pressing the [MODE] key.
Mode
The following messages will appear in turn on the display:
SEL
CAL
On Turn the unit off using the [ON/OFF] key.
Off
englIsH
11