Clean Immediately After Every Use - Nespresso AEROCCINO4 Manual De Instrucciones

Ocultar thumbs Ver también para AEROCCINO4:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Clean dIreCtlY after eVerY uSe
en
CautIon: Ensure the Aeroccino is cold before removing it from the base. Or, if removing with care, rinse with cold water
immediately to cool down the Aeroccino and avoid burning risks.
CautIon: In case the base needs to be cleaned, unplug it first and use only a damp cloth. Make sure the connector is dry before
operation. Do not immerse the base in water nor put it in the dishwasher.
1
2
1� Remove the Aeroccino from the base.
2� Remove seal from lid.
3� Remove the whisk, and the spring from the whisk.
CautIon: only use non-abrasive
cleaning materials. Do not use abrasives,
sharp objects, brushes: risk of scratches and
harm to the Aeroccino coating.
8
3
4 a
4 a� Hand washing: wash inner Aeroccino, seal, lid,
whisk and spring with detergent and rinse with warm/
hot water. Do not use abrasive material that might
damage the surface of the equipment. Don't immerse
in water.
4 b� dishwashing: put all parts except the base in
the dishwasher at maximum 70°C/158°F.
4 b
5� Dry all Aeroccino parts
with a fresh and clean
towel, cloth or paper and
reassemble all parts.
CautIon: Do not
immerse neither the
Aeroccino nor the base in
the water.
CautIon: Do not place
directly over the dishwasher
pin as it may cause damage
to inner coating.
CautIon: If the bottom
part of the Aeroccino is wet,
dry it before putting it back
in contact with the base
connector.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido