Problems And Solutions - AKASO A200 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Forward flip
Hold down the flip button, push the right
forward, and make the lever return. the
quadcopter will flip one circle forward.
Backward flip
Hold down the filp button, push the right
lever backward, and make the lever return.
the qucopter will flip one circle backward.
Operating instruction for omni-directional mode (Headless mode)
1. Please confirm the transmitter is properly connected to the quadcopter. Once
confirmed press the "omni-directional" button on the transmitter. The lights on the
aircraft will blink to confirm. The quadcopter will now fly in the direction pressed
on the right (directional) stick, regardless of which direction the head of the
quadcopter is pointed.
2. To exit this mode, press the "omni-directional" (headless mode) button again.
You will hear a beep from the transmitter, and the quadcopter will now fly in the
The headless mode on/off
direction of which the head is pointed.
Operating instruction on One-key Return of the aircraft
1. Press the "return-home" key (one key
return). The transmitter will beep and the
aircraft will slowly return to the transmitter.
2. If the aircraft comes too close to you,
regain control with the right (directional)
stick. Do not press the" return-home"(one
key return) again.
One-key Return
PHOTO/VIDEO FUNCTION
Kindly note that it can be recorded and took pictires by APP only, remotes can not support doing
this.
When entering "one-key
Return Mode", simply pushing
the Direction lever toward
either direction(forward or
backward or to the left or to
the right) can exit from the
"one-key Return Mode"
5

PROBLEMS AND SOLUTIONS

2. The batteries are installed
improperly
PRECAUTIONS:
1. Insufficient electricity power will shorter the control distance.
2. Insufficient electricity power will lead to difficulties in taking off and ascending.
3. Fix the quadcopter if there is any damage. Flying a damaged quadcopter could cause injuries.
4. Remove the transmitter batteries if not in use in case of battery leadage.
5. Avoiding dropping and crashing the quadcopter for it will lead to damages and shorten the
use life.
6. Before flying, always turn on the transmitter switch first, then the fuselage switch.
Otherwise, the quadcopter will be confused with extraneous signal and be out of control.
7. After flying, always turn off the fuselage switch first, then the transmitter switch.
Otherwise, the quadcopter will be confused with extraneous signal and be out of control.
6

Publicidad

Tabla de contenido
loading

Productos relacionados para AKASO A200

Tabla de contenido