Radio Functions - Medion LIFE P62024 Manual De Usuario

Radio functions

Selecting the band
 Press the B N D button to change between the VHF bands (FM1, FM2, FM3) and
medium wave (MW) bands.
You can store up to 6 stations in each of the four bands.
NOTE!
The three VHF frequency bands FM1, FM2 and FM3 all cover the same fre-
quency range (87.5 to 108 MHz), which means that you can save up to 18
stations in the VHF band.
Search for a station
 Briefly press one of the buttons  or  on the remote control to start searching for
stations automatically. The device will search for the next station automatically.
 Press one of the buttons  or  on the remote control to stop searching for sta-
tions automatically.
 Press and hold down one of the buttons  or  on the remote control until the
MANUAL
message
 You can manually change the station frequency upwards or downwards with the
button  or on the remote control.
NOTE!
You can also search for stations from the device by using the buttons T R K
 or T R K .
Search for stations with alternative frequencies (AF)
Stations that broadcast an AF signal broadcast alternative frequencies that also broad-
cast the selected station, so that you can receive the same radio programme over lon-
ger distances. (You can find details on this service in section „Radio Data System" on
page 67.)
 Press the B N D button to select the frequency in which you would like to search for
and, if necessary, store the station.
 Press the S C A N button (remote control) to search through the FM band for sta-
tions broadcasting an AF signal.
 The scanning process stops for 5 seconds each time it finds a station and then con-
tinues.
 If you want to listen to or store the station, press the S C A N button to stop the
scanning process.
66
appears in the display.