Installation; Fitting Rubber Feet; Fitting To Rack - Monitor Audio IWA-250 El Manual Del Propietario

Installation

Leave the amplifier unplugged from the mains until the installation procedure is
completed.
If you are going to mount the amplifier on a shelf/ cabinet, fit the self adhesive rubber feet (illustrated
below). If you are rack mounting it, please refer to the next section.

Fitting Rubber Feet

Fitting to Rack

If installing in a rack or communications cabinet, you need to fit the supplied brackets first.
NOTE: When fitting to a rack, please ensure there is space above and below to allow
for suitable airflow.
2 IWA-250