Tabla de contenido
Publicidad
1
BBE
2
Example/Exemple/Ejemplo: BBE 1
3
22
English/Français/Español
BBE
1
Equalizer/Surround
Operation
Creating a Custom BBE
Curve
Press the BBE button to select a BBE mode
to be adjusted. The BBE indicator will blink
for 5 seconds.
While the BBE indicator is blinking, press the
EQ Band up/down ( / ) buttons to select
either the high or low frequency bands to be
adjusted.
Adjust for desired levels by pressing the level
UP/DN ( /
) adjusting buttons while the
indicator is blinking.
Adjustments can be made to the other BBE
modes by repeating the above procedures for
each one you wish to customize.
English
Publicidad
Tabla de contenido
