Copying Photos To Internal Memory - Insignia NS-DPF7WA-09 Guia Del Usuario

Marco para fotos digitales de 7"/8"
Ocultar thumbs Ver también para NS-DPF7WA-09:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
2 Insert a new memory card into the appropriate slot, or
press
card. For instructions on copying files from a memory card to
internal memory, see "Copying photos to internal memory" on
page 13.
3 Press
begins that displays the content of the source you specified.

Copying photos to internal memory

You can copy a single photo, multiple photos, or all photos from an
attached memory card to the frame's internal memory.
To copy selected photos to internal memory:
1 Press
2 Press
from, then press
or
to select internal memory or an existing memory
Note
The option to select a card type or USB drive is disabled if
there is no card of that type inserted into the corresponding
slot or port.
Tip
You can press
thumbnail mode and file list mode. Thumbnail mode
displays all files on the selected memory source, and File
List mode displays files and folders.
(SLIDE SHOW) on the remote control. A slide show
Notes
You cannot copy photos from the internal memory to an
attached memory card, and you cannot copy photos
between attached memory cards.
Because you cannot copy photos back from the frame to a
memory card, the frame should not be treated as your
primary photo storage method. Make sure that you have the
photos stored elsewhere (such as a memory card).
(BACK) until the Select Card screen opens.
or
to highlight the memory card you want to copy
( / /ENTER). The thumbnail screen opens.
Tip
If you begin marking images at this point, you are prompted
whether you want to copy the marked images. Select YES.
www.insignia-products.com
(thumbnail/file list) to switch between
13

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ns-dpf8wa-09

Tabla de contenido