Connect The Device With The App (Pairing); Use - ADE FITVIGO AM 1600 Instrucciones De Operación

Connect the device with the app (pairing)

1. Activate Bluetooth on your smartphone.
2. Start the app and follow the instructions. Pay attention to the information and
explanations displayed.
After a short period of time your activity tracker will be connected with the FITvigo app
(display indicator "Success").
Further information on the FITvigo app can be found online at www.fitvigo.de
Do you need help or do you have additional questions?
Then please send us an email at: support@fitvigo.de

Use

Counting steps
Once you have successfully connected your activity tracker with the FITvigo app,
measurement begins as soon as you start walking. Recording and transmission of data
are done automatically. Pay attention to the following:
‚ The activity tracker makes a permanent record of your physical activity. In doing
so, all of your physical movements are interpreted in steps. As a result, the actual
distance covered may differ from the indicated distance.
‚ The pre-set step length is an average value that cannot be changed.
‚ Every day at midnight, the measurement restarts at zero.
Enabling/disabling sleep monitoring
− When going to sleep, press and hold the button on the activity tracker for approx.
5 seconds until a small, blinking moon appears on the right of the display and the
device vibrates briefly.
Sleep mode is active.
− When getting up, press and hold the button again for approx. 5 seconds until the
moon icon is no longer displayed and the device vibrates briefly.
The activity tracker is once again in normal daytime mode.
Activity Tracker AM 1600/1601/1602
Use
17