Tv Menu; Activating Cinema Link - Magnavox MFX-450 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MFX450_eng
11/26/02 3:21 AM
MENUS
* SELECT INPUT
Assigns the audio input connectors to the different source
selections chosen with SOURCE SELECT (see "Source
selection" for details).
COAX1
Digital coaxial input 1, COAX 1 IN
COAX2
Digital coaxial input 2, COAX 2 IN
OPT
Digital optical input, OPTICAL IN
SAT IN
Analog audio input SAT IN
VCR IN
Analog audio input VCR IN
TV IN
Analog audio input TV IN
CDR IN
Analog audio input CDR IN
CD IN
Analog audio input CD IN
6 CH IN
Analog audio input 6 CHANNEL-DVD/SACD INPUT
* TUNER
Setup for preset radio stations (see "TUNER" for details).
AUTO INSTALL
Stores radio stations automatically
MAN INSTALL
Stores radio stations manually
GIVE NAME
Allows you to assign names to stored radio stations
RESHUFFLE
Resorts stored radio stations
18
Page 18

TV menu

If the receiver is connected to a Magnavox (or Philips)
CINEMA LINK TV via the CINEMA LINK system control bus
jacks (see "CONNECTIONS"), you may use the TV to set up
the system. An option called RECEIVER will be added to the
TV menu.
If CINEMA LINK is on, adjustments on the receiver will be
shown on the TV screen for a few seconds. Consult the
instruction booklet of your TV on how to use the TV menu.
The options offered may vary by TV model.
Switching the connection
• Press CINEMA LINK on or off to switch the connection
between the receiver and the TV.
If the connection is switched on,
y
displayed.
Note: We recommend switching CINEMA LINK off during
recording. This avoids unwanted interruptions due to
switching TV functions.
If CINEMA LINK is switched on and the TV menu is active,
TV MENU is displayed and the menu and sound functions on
the receiver are locked.

Activating CINEMA LINK

• Press
CINEMA GO on the remote control.
The TV sends a play command to the CINEMA LINK DVD
y
player, if present. The DVD player will start playing and the
receiver automatically switches to the best CINEMA LINK
sound.
• If no DVD player is connected or if the DVD player has no disc
loaded, the TV will send a play command to the CINEMA LINK
video recorder, if present.
The video recorder will start playing and the audio receiver
y
selects the best CINEMA LINK sound.
• If no video recorder source is connected or tape is loaded, the
TV will select the last watched TV channel.
is
CINEMA LINK ON

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido