C - Installation; Installing The Camera; Connecting The Camera; Wireless Connection: Ezlink Function - THOMSON dSc - 725S Manual De Instrucciones

C - iNSTALLATiON

1 - INSTALLING THE CAMERA

Connection tests are recommended before fitting the camera in its final location.
• Mount the camera using suitable screws and wall plugs for the type of surface (the screws and plugs
supplied are suitable for solid walls).
• Make sure the camera is properly secured to prevent it from falling.

2 - CONNECTING THE CAMERA

• Access from your camera to the network and to the Internet can be established using a wired connection
via a network cable or wireless WiFi connection.
2.1 - WIReLeSS CoNNeCTIoN: ezLINk FUNCTIoN
• Your camera is fitted with the ezLink function: if you have an Android or ioS smartphone or tablet, the
application can connect to the camera when it is shown which WiFi network to use.
• Download then install the ThomView application on your smartphone or tablet.
Important: To be configured for the ezLink function, your camera must use the default user name and
password. Reset your camera if necessary by pressing the camera "Reset" button for at least 10 seconds,
using a thin tool.
8
en
OutdOOr 1080p Ip WI-FI camera