care and c ean na
CONTROL
PANEL
Clean with a soft, damp cloth. Do not use abrasive substances.
Do not spray cleaners
directly on the panel.
The control
panel finish may be damaged
by some laundry pre-treatment
soil and stain remover products.
Apply such products
away from your dryer and wipe up any spills or overspray
immediately.
TUMBLER
Remove any stains such as crayon,
ink, or fabric dye (from new items such as towels or jeans) with an all-
purpose
cleaner.
Tumble old towels or rags to remove any excess stain or cleaning
substance.
Once these steps are followed,
stains may still be visible, but should
not transfer
to subsequent
loads.
STAINLESS
STEEL TUMBLER
To clean the stainless
steel tumbler,
use a damp cloth with a mild, non-abrasive
cleaner suitable
for stainless
steel surfaces.
Remove the cleaner
residue and dry with a clean cloth.
DRYER EXTERIOR
Clean with a soft, damp cloth. Do not use abrasive substances.
Protect the surface from sharp objects.
Do not place any heavy or sharp objects
or a detergent
box on the dryer. Keep them on the purchased
pedestal
or in a separate
storage box. This may scratch
or damage
the top cover of the dryer.
Since the entire dryer has a high-gloss
finish, the surface can be scratched
or damaged.
Therefore,
avoid scratching
or damaging
the surface
when using the dryer.
DRYER EXHAUST
SYSTEM
Should
be inspected
and cleaned yearly to maintain
optimum
performance.
The outside
exhaust hood should
be cleaned more frequently
to ensure proper operation.
32
care
and cHeanind