Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
J
WARNING - Risk of Fire
Clothes
dryer installation
must be performed
by a qualified installer.
•
Install the clothes dryer according
to the manufacturer's
instructions
and local codes.
Do not install a clothes dryer with flexible plastic venting
materials.
If flexible metal
(foil type) duct is installed,
it must be of a specific type identified
by the appliance
manufacturer
as suitable
for use with clothes
dryers. Flexible venting
materials
are
known to collapse,
be easily crushed,
and trap lint. These conditions
will obstruct
clothes
dryer airflow and increase the risk of fire.
To reduce the risk of severe injury or death, follow all installation
instructions.
®
reduce
the risk of fire or explosion:
Do not dry items that have been previously
cleaned,
washed,
soaked,
or spotted
with
gasoline, dry cleaning
solvents,
or other flammable
or explosive
substances.
They
emit vapors that could ignite or explode.
Any material that has been in contact
with a
cleaning solvent or flammable
liquids or solids should
not be placed in the dryer until all
traces
of these flammable
liquids or solids and their fumes have been removed.
There are many highly flammable
items used in homes,
such as acetone,
denatured
alcohol,
gasoline, kerosene,
some liquid household
cleaners,
some spot removers,
turpentine,
waxes,
and wax removers
Items containing
foam rubber (may be labeled latex foam) or similarly textured
rubber-
like materials
must not be dried on a heat setting.
Heated foam rubber materials
can,
under certain circumstances,
produce
fire by spontaneous
combustion.
w_.,._ What
to do if you smell gas:
•
Do not try to light any appliance.
•
Do not turn on the appliance.
Do not touch
any electrical
switch.
Do not use any phone in your building.
•
Clear the room, building or area of all occupants.
Immediately
call your gas supplier from a neighbor's
phone. Follow the gas supplier's
instructions.
•
If you cannot reach your gas supplier,
call the fire department.
•
Installation
and service must be performed
by a qualified installer, service agency, or the
gas supplier.
SAVE THESE INSTRUCTIONS
safety
instructio__s
Publicidad
Tabla de contenido
