Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Refueling
Use only regular leadless petrol
Explosion hazard!
Refuel outdoors only!
Never refuel with engine running or while it still hot!
Do not smoke and do not handle open fire!
Engine oil filling
Use only oil type 15W40
Use oil dip rod to check the filling status.
Avoid fuel or oil splashing so that soil contamination
is avoided. Use appropriate tools for filling (funnel)
Technical Data
Drive Type:
Hand push
Engine Model:
DG1P65F
4-stroke, Forced air cooling,
Engine:
Single cylinder, OHV
Max Torque:
7 N.M/3000
Max Power:
2.6 kW
Rated Speed:
3000
Displacement:
139cm³
Starting:
Recoil
Tank Volume:
1.5L
lubricating oil tank
0.6L SAW 15W-40
Cutting Path:
360mm Min. / 590mm Max.
Depth of cut
260mm
Wheel Diameter:
148mm
Wheel Width:
38mm
Noise Lever:
93db
Carton
700*380*660mm
Measurement:
N.W./G.W.:
34Kg/37kG
NOISE EMISSION
Noise emission values measured according to
relevant standard.
LpA
(Acoustic pressure
level )
LwA
(Acoustic power level)
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. : 3.548 m/s² K = 1.5 m/s²
-1
min
-1
min
77.3 dB(A)
K = 3 dB(A)
93 dB(A)
K = 3 dB(A)
ATTENTION !
must be worn.
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-
sales service department.
After-sales Service and Application Service
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found
under:www.eco-repa.com
ELEM GARDEN TECHNIC application service team
will gladly answer questions concerning our
products and their accessories : sav@eco-repa.com
MAINTENANCE AND STORAGE
Cultivator Maintenance
The transmission case has grease installed at the
factory. We recommend checking the grease level
every month. DO NOT overfill.
Keep all screws, nuts, and bolts tight.
For cold weather operation, store the unit in a
cool environment. Transferring the unit from a warm
to a cold place can cause the build up of harmful
condensation.
Never store a machine whose tank still contains
gas in a building where fumes may reach an open
flame or spark.
To reduce fire hazard, keep the engine, silencer,
battery compartment and the storage area of the
plant released gas or excess fat.
Replace worn or damaged parts for safety.
If the tank must be drained, do this operation
outside.
16
Publicidad
Tabla de contenido
