Brandt DVDP9x2E1L Manual De Instrucciones página 118

Lithium battery which is accessible and can be replaced.
Remove the battery holder located on the bottom of the remote control
to remove the battery.
Incorporated Battery
The battery type used in the unit is one lithium battery. The battery is
in cooperated and is not readily accessible.
The battery must be disposed of at your local recycling point.
Installing Remote Control Battery
Push and pull
from the remote control and insert one 3V CR2025
lithium battery in the battery holder with the print
face up, then replace the battery holder.
WARNING:
To save power: switch off mains power or pull out the power adapter
plug when you are not using the apparatus.
Never operate the apparatus and try to view video while driving a vehicle.
To prevent injury, this apparatus must be securely attached to the car
seats as in accordance with the installation instructions.
Class 1 laser product
This product contains a low power laser device. Invisible laser
radiation when the enclosure is opened and interlocks are
defeated.
Avoid exposure to beam.
to slide out the battery holder
EN-5