ClearSounds CSC50-ER Manual De Uso página 15

To program your one-touch memory dial buttons please follow instructions below:
1. Lift the handset.
2. Press the PROG (program) button
3. Using the keypad, dial the number you would like to save, including "1" and the area
code (if applicable).
4. Press one of the Priority or Memory Dial buttons (M1 – M6) located on top of the
phone
(See diagram #18)
the same procedure) for a phone number.
5. The Caller ID Screen will display <<SAVE OK>>
6. To register your stored phone numbers, use the phonebook insert card located
under the base.
NOTE: Numbers will be lost if the phone is not receiving any power, either through the
phone line, batteries, AC adapter during a storm, power outage or if you disconnect the
phone. Entering a new number in the same location will automatically erase the previous
number.
DIAGRAM #16
Program Button
If at any time you have questions about your telephone please contact our ClearSounds
Customer Service Department at: 1-800-965-9043.
(See diagram #16).
.
(See diagram #17)
. Each button can be programmed (or reprogrammed using
DIAGRAM #17
Telephone Keypad
DIAGRAM #19
LCD Display
(See diagram #19).
DIAGRAM #18
Memory / Priority Buttons
15