koban KDP1 360FP Manual De Instrucciones página 30

KDP1 360 FP
Presence detector
Refer to wiring diagrams for correct
cables connection (FIG.5 - FIG.7),
then put protection cap back and
screw it tightly (See FIG.9).
Non-dropping
screw
Protection cap
Cables entry
Knock-outs on protection cap of
terminals are for cables entry.
Please refer to following illustration
for application.
No knock-outs are used:Φ2mm (See
FIG.10-A);
Section area for cable entry:
Φ2mm
FIG.10-A
Instructions manual |
FIG.9
30
Small knock-outs are used:Φ8mm
(See FIG.10-B);
Section area for cable entry:
Φ8mm
FIG.10-B
Big knock-outs are used:Φ8mm (See
FIG.10-C);
Section area for cable entry:
Φ12.5mm
FIG.10-C
www.grupotemper.com