Fellowes Cambio Manual Del Usuario página 6

ASSEMBLING THE DESKTOP
STEP 1
• Attach the anti-vibration pads to the surface of the crossbar on the 12
positions as shown.
STEP 2
• Align the pre-drilled screw holes with the mounting holes on the crossbar.
Insert and tighten the 4 Phillips Head screws.
• Repeat the same process to tighten the other side of the desktop.
STEP 3
• Attach the controller to the desktop with 2 Phillips Head screws using a drill.
• Stick the adhesive cable clips under desk to organize cords.
STEP 4
• Plug power cable into controller on base and into a power outlet.
STEP 5
• There are two adjustable foot pads under each foot. If the floor is uneven
simply turn the pad to adjust the height to make the desk stable.
Tip: Use a bubble level to check if the desktop is even.
6
M
1
R
2
S-B
M
L
N