PROPAIN 000871-AD Instrucciones De Montaje página 16

// SWITCHING ON YOUR BIKE
Before the first use the battery pack must be activated by connecting it to the charger. The bike cannot be switched on without activating and charging the battery pack!
1
+
-
1. Press the ON/OFF button on the down tube.
→ After about three seconds the system is activated and the display on the handlebars turns on.
→ The pedals must not be loaded during activation. The system is calibrating.
2. Adjust the support level via the rocker switch on the handlebar. The upper rocker increases the support, the lower rocker decreases it.
→ You can choose between the three support levels ECO, TRAIL and BOOST.
A
B
C
The display shows the following information:
• A: Battery level
• B: Current speed
• C: Assist mode
D
• D: Assist gauge