THOMSON DSC 323W Manual Del Usuario página 35

1080P HD WIFI IP CAMERA
All of your camera settings can be accessed remotely
by right clicking on the name of the camera in the
list (or on the image that it displays) then clicking on
"Paramètres caméra [Camera parameters]":
• Status menu: shows you the current status of
the camera: fi rmware version, user name, main
functions activated, last operations performed.
• Basic parameters: enables you to defi ne the
name and time of the camera that can be
embedded into the video of the camera.
• Network: here you have access to all of the
settings linked to network use: IP confi guration,
WiFi confi guration with the option of switching the
camera from a wired to a wireless connection,
ports used, email alert settings, access to an FTP
server, plug and play access settings.
• Video: here you have access to all of the
settings linked to camera video management:
resolution, number of images per second, night
vision operation, confi guration of photos taken
by the camera, contrast settings, brightness, etc.
• Detector: here you can activate and confi gure
the movement detection function and the
actions to be launched if intrusion is detected.
• PTZ (compatible cameras only): here you will
fi nd all of the settings linked to camera motor
management if it is fi tted.
• System: enables you to reset the camera to 0
or restart it.
When a camera displays its image on the screen,
additional commands are displayed in the bottom
right corner:
1 2 3 4 5 6
D - CONFIGURATION AND USE
1
This icon shows the presence of records on
the computer used (white when idle, green
when programmed/on
records are created)
Broadcast stopped and image closed
2
Start a recording on the disk of the computer
3
used*
Activation/deactivation
4
microphone (cameras
microphone only, your computer must provide
the speakers)
Take a photo and store it on the disk of the
5
computer used*
Activation/deactivation of the camera speaker
6
(cameras fi tted with a speaker only, your
computer must provide a microphone)
* For the save and capture functions to be
accessible, the disk to use must be set beforehand.
Click the System settings icon
software where to save the photos and videos on
the computer hard disk.
To view videos saved on the computer, click the
Video playback icon
10 11
www.thomsonsecurity.eu
1 2 3 4 5 6
detection/manual
of the camera
fi tted with the
to tell the
:
9
7 8 14 13 12
13
EN EN