Esataii Connector (Esataii_Top) - ASROCK ALiveNF5-eSATA2+ Manual Del Usuario

How to install eSATAII?
1. In order to enable the eSATAII port of the I/O shield, you need to connect the red
SATAII connector (SATAII_RED (PORT 1); see p.2 No.12) and the eSATAII
connector (eSATAII_TOP; see p.2 No.34) with a SATA data cable first.
Connect the SATA data
cable to the red SATAII
connector
(SATAII_RED (PORT 1))
2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port of
the I/O shield according to the eSATAII connector that you connect the SATA
data cable.
Connect one end of the eSATAII
device cable to eSATAII device
2 2 2 2 2 2
2 2 2 2
ASRock
SATAII_RED (PORT 1)
Connect the SATA
data cable to the
eSATAII connector
(eSATAII_TOP)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
ALiveNF5-eSATA2+
eSATAII_TOP
Motherboard