Esataii Connector (Esataii_Bottom); Esataii Connector (Esataii_Top) - ASROCK ConRoeXFire-eSATA2 Manual De Instrucciones

Connect the SATA
data cable to the red
SATAII connector
(SATAII_RED (PORT2))
2. If you plan to install two eSATAII devices to this motherboard, you need to
enable both the top and the bottom eSATAII ports of the I/O shield. In order to
enable the top and the bottom eSATAII ports of the I/O shield, you have to
connect the red SATAII connector (SATAII_RED; see p.2 No.13) and the red
eSATAII connector (eSATAII_BOTTOM; see p.2 No.36) with a SATA data
cable first, and then connect the orange SATAII connector (SATAII_ORANGE;
see p.2 No.14) and the orange eSATAII connector (eSATAII_TOP; see p.2 No.
37) with another SATA data cable. After that, both the top and the bottom
eSATAII ports of the I/O shield are enabled.
Connect the SATA
data cables to both
red SATAII connector
(SATAII_RED (PORT2))
and orange SATAII
connector (SATAII_
ORANGE (PORT3))
Please make sure to correctly connect the SATAII and eSATAII connectors
with corresponding color so that the eSATAII function will work successfully.
2 8 2 8 2 8
2 8 2 8
ASRock ConRoeXFire-eSATA2 Motherboard
Connect the SATA
data cable to the red
eSATAII connector
(eSATAII_BOTTOM)
Connect the SATA
data cables to both
red eSATAII connector
(eSATAII_BOTTOM)
and orange eSATAII
connector (eSATAII_TOP)