Installing Windows - ASROCK ALiveNF5-eSATA2+ Manual Del Usuario

2 . 1 2 2 . 1 2 Driver Installation Guide 2 . 1 2 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2 . 1 2 2 . 1 2 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 3 2 . 1 3

2 . 1 3 Installing Windows

2 . 1 3 2 . 1 3 Installing Windows Installing Windows Installing Windows Installing Windows
/ Vista / Vista / Vista 64-bit W 64-bit Without RAID F 64-bit W
/ Vista / Vista 64-bit W 64-bit W
TM TM TM TM TM
If you want to install Windows
Vista TM or Windows ® Vista TM
please follow below procedures according to the OS you install.
Before installing Windows
disk is supposed to include SP4. If there is no SP4 included in your disk, please
visit the below website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.
htm#the_integrated_installation_fmay
2.13.1 Installing Windows 2.13.1 Installing Windows
2.13.1 Installing Windows 2.13.1 Installing Windows 2.13.1 Installing Windows
RAID F RAID Functions RAID F unctions unctions unctions
RAID F RAID F unctions
If you want to install Windows
/ SATAII HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C. When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please choose:
1. Generate AHCI Driver diskette for Windows2000/XP/XP64
2. Generate RAID Driver diskette for Windows2000/XP
3. Generate RAID Driver diskette for WindowsXP64
4. Exit
ASRock
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
®
ithout RAID Functions ithout RAID F ithout RAID F unctions unctions unctions
ithout RAID F unctions
® ®
2000, Windows XP, Windows
64-bit on your SATA / SATAII HDDs without RAID functions,
®
2000 to your system, your Windows
2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without
2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without
®
® 2000 / Windows ® XP / Windows
Advanced screen
ALiveNF5-eSATA2+ Motherboard
TM TM TM TM TM
® ®
XP 64-bit, Windows
®
2000 optical
® XP 64-bit on your SATA
IDE Configuration.
2 7 2 7 2 7
2 7 2 7