Tabla De Contenido; Introduction - SOMFY Home Motion Cord Lift 32 RTS Guia De Instalacion

CONTENTS
1. Introduction
2. Safety
2.1. Safety and responsibility
2.2. Specific safety advice
3. Installation
3.1. Motor preparation
3.2. Tube preparation
3.3. Motor/tube assembly
3.4. Mounting the motorized tube on
the brackets
4. Wiring
5. Commissioning
5.1. Programming the RTS
transmitter
5.2. Checking the rotation direction
5.3. Adjusting the end limits
5.4. Recording the RTS transmitter
5.5. Favorite position: MY position /
Recording MY position.

1. INTROduCTION

The Cord lift 32 RTS is a motor specially dedicated to interior applications.
The Cord lift 32 RTS can motorize roman, pleated and cellular shades.
The Cord lift 32 RTS is a battery operated motor, powered with lithium primary bat-
teries or NiMH batteries with solar pack. The motor can also be powered by a power
supply.
Warning : The Cord lift 32 RTS is compatible only with the «Sunis Indoor WireFree
RTS» sensor.
Warning : The Cord lift 32 RTS cannot be used with sealed double glazing.
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
2
6. Operation
6.1. Mode selection: Roller or
2
Tilting mode
2
6.2. Up, Down, My: In roller mode
3
6.3. Up, Down, My: In tilting mode
3
7. Additional setting
3
7.1. Favorite position: MY position
3
7.2. End limit re-adjustement
3
7.3. Adjusting the tilting speed
7.4. Modifying the motor rotation
3
direction
4
7.5. Modifying the wheel rotation
direction
4
7.6. Adding/Deleting RTS transmitter 8
4
7.7. Erasing the transmitters from
4
the memory
4
7.8. Erasing the memory of the motor 8
5
8. Troubleshooting
9. Technical data
5
5
5
5
6
6
6
7
7
7
8
8
9
9
3