Installation; Motor Mounting - SOMFY Home Motion Cord Lift 32 RTS Guia De Instalacion

3. INSTALLATION

3.1. Motor mounting

1) If needed, Snap the headrail adapters
on the motor.
2) Snap the proper shaft adapter on the
motor.
3) Press the shaft adapter until the drive
rod flanges "snap" into the shaft adapter.
3.2. Motor integration inside the headrail
Slide the motor into headrail until the
shaft "snap" into the adapter shaft.
For optimal radio reception, the
antenna should be kept straight
and outside the headrail.
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
1
2
3
5