ElektroStator T270 Manual De Instrucciones página 9

Monitoring screen icons
1. signal strength indicator
2. temperature of the baby's room
3. lullaby is playing
4. alarm activated
5. battery indicator
6. PTT function activated
7. date and time
Menu options
Main menu
Press menu key at monitoring screen will enter the main menu.
It contains 4 items:
1. camera
2. alarm
3. settings
4. system info
You can press the up key or down key to move the cursor to select
an item and press menu
key will enter the sub-menu which you selected.
Press return key will back to monitoring screen.
Anti-flicker
You are able to adjust the frequency of 50/60Hz to suit your lighting for anti-flicker.
System mode
This menu allows you to choose the working mode from the following: normal mode/VOX
mode.
VOX sensivity
Switch the vox sensivity at low/medium/high level.
LCD backlight
You are be able to adjust the brightness of the LCD you are viewing and
the LCD backlight active time in menu operation.
System info
The are contains system information such as software version, hardware version, build date etc.
Wall mounting instructions
1. Mark the wall in the correct places to drill holes for wall-mounting screw (4mm
headscrew; 39mm between holes).
2. Insert 4mm head screws (not supplied) into the holes and tighten the screws.
Then, align your baby unit with the screws and push it down.
3. Point the camera lens towards the area you want to monitor. Adjust the baby
unit until you are satisfied with the image in the parent unit.