Troubleshooting - Insignia IS-PDDVD7 Guia Del Usuario

Dual DVD.fm Page 28 Monday, August 8, 2005 10:19 PM
Problem
(
The hand icon ( )
appears on the screen
The picture is distorted
No forward or reverse scan
The IR sensor is inoperative
The disc will not play
The disc starts to play, but
then stops immediately
28
IS-PDDVD7 Dual Screen DVD player
Possible solution
The feature or action cannot be completed at this time
because:
• The disc's software restricts it.
• The disc's software doesn't support the feature
(angles for example).
• The feature is not available at the moment.
• You have requested a title or chapter number that
is out of range.
• The disc might be damaged. Try another disc.
• It is normal for some distortion to appear during
forward or reverse scan.
• Some discs have sections that prohibit rapid
scanning or title and chapter skip.
• You may not be able to skip through the warning
and credits at the beginning of a movie because
this part of the movie is often programmed to
prohibit skipping.
• Make sure that the batteries in the remote are
fresh.
• Make sure that the remote sensor eye is not
obstructed.
• Insert a disc with the label side facing up.
• Check the type of disc you put into disc tray. This
DVD player only plays digital video discs, audio
CDs, and MP3s.
• Both the player and the disc are coded by region.
If the regional codes don't match, the disc can't
be played.
• The disc is dirty. Clean it.
• Condensation has formed in the player. Open the
disc tray and let the player dry out.
www.insignia-products.com