Basic Operation - Insignia IS-PDDVD7 Guia Del Usuario

Reproductor de dvd con dos pantallas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Dual DVD.fm Page 15 Monday, August 8, 2005 10:19 PM
IS-PDDVD7 Dual Screen DVD player

Basic operation

Playing DVDs and CDs
To turn on the player and adjust the sound:
1 Press POWER on the player and the monitor(s) to turn them on.
2 Turn the VOLUME knob to adjust volume (including when using
headphones).
To load a disc:
1 Press OPEN to open the disc tray.
2 Hold the edges of the disc and place the disc in the center of the
tray with the printed side up.
3 Close the disc tray until it clicks.
To play a disc:
1 Load a disc and press
2 Stop playback by pressing
3 Remove the disc and turn off the player.
Note
You must press
To pause a disc playing a movie:
1 When playing a DVD, press
2 Pressing
3 To resume normal play, press
To pause a disc playing music:
1 When playing a CD, press
2 Press
To adjust the picture:
1 To adjust the picture, press the Picture button on the monitor to
access the picture adjustments.
2 Press the Picture button again to select the Brightness
adjustment, then press the Volume +/– buttons on the monitor until
a moderate brightness is selected.
3 To adjust the color, press the Picture button on the monitor to
access the picture adjustments.
4 Press the Picture button until you select the Color adjustment,
then press the Volume +/– buttons on the monitor until the desired
color is selected.
5 To adjust the contrast, press the Picture button on the monitor to
access the picture adjustments.
PLAY to play the disc.
STOP.
STOP
twice to stop the playback of DVD discs.
again advances the picture one frame at a time.
to make playback pause.
PLAY to resume playback.
www.insignia-products.com
to make playback pause.
PLAY.
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido