Placing Originals; Automatic Document Feeder (Adf) - Epson L555 Guía Básica

Basic Guide
D
Load paper with the printable side up, against the
right side of the rear paper feed.
Note:
❏ Fan and align the edges of the paper before loading.
❏ The printable side is often whiter or brighter than the
other side.
❏ Always load paper into the rear paper feed short edge
first, even when you are printing landscape
-oriented pictures.
❏ You can use the following sizes of paper with binding
holes: A4, A5, A6, Legal, Letter. Load only 1 sheet of
paper at a time.
E
Slide the edge guide against the left edge of the
paper, but not too tightly.
Note:
For plain paper, do not load paper above the H arrow
mark inside the edge guide.
For Epson special media, make sure the number of sheets
is less than the limit specified for the media.
Paper and Media Handling
F
Flip the feeder guard back.
Note:
For instructions on loading media other than plain
paper, see the PDF User's Guide.

Placing Originals

Automatic Document Feeder
(ADF)
You can load your original documents in the Automatic
Document Feeder (ADF) to copy, scan, or fax multiple
pages quickly. You can use the following originals in the
ADF.
Size
Type
Weight
Capacity
c
Important:
To prevent paper jams, avoid the following
documents. For these types, use the scanner glass.
❏ Documents held together with paper clips,
❏ Documents that have tape or paper stuck to
❏ Photos, OHPs, or thermal transfer paper.
❏ Paper that is torn, wrinkled, or has holes.
6
A4/Letter/Legal
Plain paper
2 2
64 g/m to 95 g/m
Total thickness of 3 mm, up to about 30 sheets
(Letter, A4) 10 sheets (Legal)
staples, etc.
them.