Alarm / Battery Fault Muting - Gigaset smoke Guía De Instalación Y Funcionamiento

smoke
SMOKE ALARM
ALARM MUTING
When an alarm is raised, alarm muting can be activated by pressing the face of the
alarm. This reduces the response sensitivity of the alarm / increases its activation
threshold. The alarm is muted if the smoke concentration in the smoke
chamber is below the increased activation threshold after the face
of the alarm is pressed.
If the smoke concentration is still above the increased
activation threshold, muting is not activated until
the smoke concentration drops below the increased
activation threshold.
The smoke alarm is muted.
The smoke alarm returns to normal mode after
about 10 minutes.
BATTERY FAULT MUTING
This function is especially useful at night. Press the test button on the face of the alarm
to suppress the fault signal for about 8 hours when a battery fault occurs. After this time,
the battery fault signal is sounded again and you are reminded to replace the smoke
alarm.
42